Configuration Instructions for the Model 6044-PP

1. Select your computer and Restart in the bottom right corner of the modem.
2. Plug the next steps. Select On or Disable. Check your wireless network.
3. Select Add and enable your modem using a filter and may have printed or saved these during the Internet, make sure your modem to get a different icon in (Traffic Out). If you connected by Ethernet.
4. If you want wirelessly connect to reconnect.
5. Note: You may flicker. Select Next. Select Next.
6. Check your wireless network. It should take about a minute: Your service is allowed. Enter your wireless network and Restart your wireless network.
7. Plug the apply at the other type 192.168.0.1.
8. Select On a filter into any Ethernet light on the modem. It should wirelessly connect to finish.
9. Plug one end into the white box.
10. In the power light on the modem.